First go to menu then dish settings on echo 8.
Then go down to highlight the transponder hit ok.
then you will have a tp list i went to tp 12384
then hit the yellow button (edit tp)
the tp settings i had to change polarity to H it was V the symbol was correct at 20000 FEC is correct at 5/6 on tp 12384
Hope this helps
this is what others have don to fix the local issue
o.k what i had to do is go in and delete the transponder that didn't work edit the one that did then scan that transponder to get locals my locals run on 3 different transponders
thanks gos to Joker1961
Last edited by SatSlayer; 10-14-2008 at 03:41 AM.