Webloader 192.168.001.101

[captlas]

Does this webloader still work. If not is there another IP address that works?

[dhuckabay]

Originally Posted by captlas

Does this webloader still work. If not is there another IP address that works?

The webloader is out of service, also can't update from the set. You will need to use a computer and cable.

[goku1590]

Originally Posted by captlas

Does this webloader still work. If not is there another IP address that works?

The web loader works just fine , make sure you drop those extra 0's you have and make sure your firewall/anti-virus is not blocking it from working.

Originally Posted by dhuckabay

The webloader is out of service, also can't update from the set. You will need to use a computer and cable.

webloader is the network update with your internet explorer , direct web update from the menu of the receiver is down though.

[dhuckabay]

Originally Posted by goku1590

The web loader works just fine , make sure you drop those extra 0's you have and make sure your firewall/anti-virus is not blocking it from working.


webloader is the network update with your internet explorer , direct web update from the menu of the receiver is down though.

Sorry about the bad info, it was dead last week, must have come back to life.

[goku1590]

Originally Posted by dhuckabay

Sorry about the bad info, it was dead last week, must have come back to life.

NP , I was just pointing out that the 2 are different and that the webloader worked

[captlas]

The webloader used to work with my firewall so I'm thinking when I'm trying it's down. I'm sure this next question has been asked numerous times but... I'm now trying to load a Solaris with loader 131 and getting the comport open error on all 4 ports using windows vista. Help Please! Please send links to different files and instructions if avail.

[goku1590]

webloader does work you must be putting the wrong address in the browser.
for the serial loader are you using a usb>serial device, go to device manager and see what port it is on.and change the loader to the appropriate com or change the serial device to com1 its up to you.
Also i will be uploading Nfusion channel editor which you can also send files from through your network.