| |
|
|
|
|
|
#1
11-01-2009, 12:51 PM
|
|||
|
|||
|
Missing channels
I have been playing with my nfusion for a while and having some problems.
I recently installed a 33" dish pointed at 118.8 to pick up 118.8 and 119. I am getting some channels from the 118 but not all of them. I am missing 744- PTV and zee cinema which i beleive is 790. I did further research and found that those channels are on 12111 ghz and then i noticed I dont have any channels from that freq/TP. I checked my friends kbox and he has 18 tp's listed under the 118.8 and I only have 13. I tried to add in the tp, but when i try to add the TP I got very low signal and freq and it will try to scan channels and then nothing added. I tried to add the channel with the apid and ppid and still nothing. Is there something I am missing. or is there another way to add a tp. I am using a diseq switch. I have a dish pointed at Bev and one at 118 and 119. My antenna settings below:: Satellite 118.8 Anikf3 LNB Type - Standard LO freq 10750 22khz off I did a factory file u 48 load as well and then program im running is 153.1. Any info would be appreciated. 
|
|
#2
11-02-2009, 02:47 PM
|
|||
|
|||
|
just reaching out again, someone testing nfusion has to be pointed at 118.8 (Anik F3). Can you tell me what your settings are and how many TP's you see listed under the 118.8. I am really close to giving up on the nfusion.
Any way to add TP's?
|
|
#5
11-03-2009, 11:34 AM
|
||||
|
||||
|
Here is a list of tp's for 118.8 from lyngsat http://www.lyngsat.com/anikf3.html remember that the green ones are HD.
When adding the transponder watch the signal and quality ,if they are low you will need to fine tune your dish to get signal and quality up to snuff.
__________________
Read the forums they are your friends and will usually answer all your questions. The rules are there for your protection and Purefta's protection http://purefta.com/forum/showthread.php?t=9123
|
|
#6
11-03-2009, 04:14 PM
|
|||
|
|||
|
i have tried that as well, initially i couldnt even get the tp added into the list. Ic an get the signal and quality into the 80's and still nothing. I will play around with the dish some more this weekend.
I think i followed the right procedure to update the tp's but will continue to work at it.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| missing channels and duplicate channels | dollarz | Viewsat 9000HD Discussion Only | 4 | 06-18-2009 11:25 AM |
| Missing channels | supergirl5 | CW 800S Discussion Only | 3 | 10-31-2008 01:43 PM |
| missing CI channels on bev | mickk | Conaxsat CNX Discussion | 9 | 10-22-2008 01:58 PM |
| missing channels+duplicate channels | tuffgong77 | CW 600S Regular Discussion Only | 2 | 12-12-2007 02:45 PM |
| EchoSt-xxx, # of TPs, Double Channels, Missing Channels by teach | OnLoOkEr0070 | Viewsat Tutorials | 0 | 01-16-2006 04:05 PM |
Linear Mode
