Satellite are missing No 110 or 119?

[shunail]

Hi there,
it may be the most dumbest thing but I don't seem to find Satellite 110, 118 or 119 under Dish Installation - Satellite names. Is something wrong with Limesat or do I need to change something?? I'm not getting any channels!!! PLEASE HELP

[goku1590]

If it is Factory state you will not see those sats. you need to load the most recent file for your receiver.

[shunail]

I did already. I loaded file from Feb 2012 from Limesat files

[dhuckabay]

You have not said which Limey you have (1.24 if HD air, but you need to go to utilities/system info and check to make sure that the file took. As far as I know the files contain the sats and believe that Goku is right on your problem.

[shunail]

It's Limesat HD Air with 1.24 now

[setwire]

It's Limesat HD Air with 1.24 now

I am using a LS HD Air unit with that bin file and I have no problems finding the Sats.

They are all there on my unit.

[shunail]

Here is Limesat HD Air system shot:
photo 1.JPG

These are the only Satellite in the list
photo 2.JPG

These are the settings from my original Dish Network Receiver

photo 3.JPG
photo 4.JPG
photo 5.JPG

[goku1590]

Factory default it and check to see if the sats appear. If not try loading the file again as it appears something is corrupt on your receiver.

---------- Post added at 09:44 AM ---------- Previous post was at 08:50 AM ----------

Also 50% signal is awfully low, you may want to re aim your dish.

[wardriver]

config, sys recovery, enter password 0000, factory set. should work.

[shunail]

Thanks wardriver. That did it. Factory reset fixed the issue.