Captive Works Release new recovery disk image

[Tonyk2]

No links to other sites

Here is how to install the recovery CD:

1) Download the file CW3000HD Recovery Image
2) Unzip the file to get cw3000-recovery-1.0.1.11.iso and burn it to a CD with your favorite CD burning software.
3) Once you have a CD with this image on it, insert the CD into the DVD drive of the CW-3000HD.
4) Connect a computer keyboard.
5) Press the Power Button
6) When the initial splash screen appears (that is the one with the press TAB line at the bottom) press the F8 button on your keyboard. The bottom line will change to "Entering Boot Menu".
7) When the boot menu displays, use the up/down arrow keys on your keyboard to select the DVD drive. It will be listed under a CDROM heading. Press enter after selecting the DVD drive.
8) The system will boot and you will see text scrolling up the screen. You will see a selection menu on the screen.
9) Type 1 for a system restore. Type 2 to reboot with out restoring. Press Enter.
10) The installation file is large. Do not interrupt this process. The system will reboot after a few minutes.
11) Make sure one TV cable is connected to the CW-3000HD.
12) The system will reboot one more time.
13) The main menu screen will appear. Pay attention to the type of connection/resolution selected. Make sure it matches your TV.

[CG]

Don't post links to other sites and make sure when you post a file you post in the file section only, i will upload your file and move your thread to the file section